Translation of the original Operation Manual
4-2
•1307_PU280_SV1018DV1020_BAoDB_en•ski
en
Installation and Assembly
➤
Connect alls hoses and cables to the material flow heater as follows,
- viewed from the front towards the control cabinet.
Pos. Designation
1
Material hose
2
Material hose
3
Compressed air hose for spray
gun
4
Plug of temperature sensor
5
Plug for hose package heater
Figure 4.1
➤
Connect the individual hose package segments,
(Figure 4.2)
.
The hose package can be made up of several hose package segments of
15 m each. The assignment of the individual material hoses can be recognized
by the colour coding.
➤
3-phase: max. 3 hose package segments
Pos. Designation
1
Material hose
2
Material hose
3
Compressed air hose for spray
gun
4
Plug of temperature sensor
5
Plug for hose package heater
Hose package,
e.g. L1
Hose package,
e.g. L2
Figure 4.2
➤
Connect the spray gun to the hose package.
Respect and follow the notes in chapter
“11.3.4 Connect the spray gun to the
or in the associated operating instructions for the
spray gun used.
4.2.1 Connection
of the hose
package
4.2.2 Connecting
individual
hose package
segments
Attention!
Ensure correct component
allocation at all times!
red =
Iso
components
(isocyanate)
blue =
Poly
components
(Polyol)
4.2.3 Connection
spray gun to the
hose package
Summary of Contents for DUOMIX PU280
Page 68: ......