Translation of the original operation manual
HERKULES PFP
11
HERKULES PFP_BAoDB_en_1402_B · rs
Safety
2.2.6 Health risks
Follow the safety notes and dosing information of the manufacturer and the
generally applicable regulations when handling paints, solvents, oils, greas-
es and other chemical substances.
CAUTION
Depending on the materials being applied solvent vapours may be generat-
ed which could cause damage to health and objects.
➤
Always ensure sufficient aeration and ventilation at the workplace.
➤
Always observe the processing instructions issued by the material man-
ufacturers.
When cleaning your skin, use only appropriate skin protection, skin cleaning
and skin care products.
In closed or pressurized systems dangerous chemical reactions may occur if
parts made of aluminium or galvanized parts come into contact with 1.1.1 - tri-
chloroethane, methylene chloride or other solvents containing halogenated
hydrocarbons (CFC’s). If you want to process materials containing the afore
mentioned substances, we recommend to consult the material manufacturer to
clarify the usability of such substances.
For these materials, we have available a range of rust- and acid-proof units.
2.3 Information signs on the unit
Information signs attached to the unit, like safety
information (see Fig. 1) refer to possible danger
areas and must be strictly observed.
They must not be removed from the unit.
Damaged and illegible information signs must be
replaced immediately.
Apart from this you should also read and follow
the safety notes in the operation manual.
Fig. 1: Safety Information
