Menu Function Explanation :
1. Menu
Press menu button to enter menu mode.
Resolution
1080FHD 1920*1080, 720P 1280*720
WVGA 848*480, VGA 640*480
Loop recording
Off/1 min/3 min/5min/10min
HDR
Off/On
Exposure
+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0/0, -1/3, -2/3, -1.0, -4/3,
-5/3, -2.0
Motion Detection
Off/On
Record Audio
Off/On
Date Stamp
Off/On
Gravity sensing
Off/Low sensitivity/Medium/High
Parking movie
Off/On
Wifi
On/Off
Date/Time
YY/MM/DD
Auto Power Off
Off/3min/5min/10min
Beep Sound
Off/On
Language
English /Simplied Chinese/Traditional Chinese
Frequency
50Hz/60Hz
Screen Saver
Off/1min/3min/5min
Delayed shutdown
Off/10sec/20sec/30sec
Plate Number
Off/On
Format
All data will be deleted Cancel/OK
Default Setting
Return menu setting to defaults Cancel/OK
input voltage
DC5V
Current
1.5A
Version
K6_20180727.V0.1
2. Function
When the engine is on, it will record video automatically, and the light will flash.
In the main menu of APP, press ok button to start record, the red cycle
is flashing.
When the engine is off, it will save the video and turn off automatically. The recording videos are saved on the
TF card, if the TF card is full, it will cover the earlier segment
【
Reminder
】
A: the time of recording can set in the menu:1min/3min/5min/10min, if choose any one of “1/3/5/10”,
when the TF card is full, it will cover the earlier segment.
B: the recording files for video and photo will be saved under the file “CARDV”, video in file of “MOVIE”
and photo in the file of “PHOTO”.
3. photo function
In the non-video status, press
for 3 seconds then you can enter photo mode, press ok can take one picture,if
need to go back the main menu, press
for 3 secondes again.
4. playback
In the non-video status, press
for 3 seconds then you can enter photo mode, then press
for 3 secondes
