65
Step 3
, Click
to complete config.
3.5.2.2 Local
Here it can display kinds of information of local SD card in the local storage list. You can also realize several
operations such as read-only, read & write, hot swap and format.
Select “Setup > Storage > Destination > Local”, the system will display the interface of “Local” shown in
Figure 3.5-7
Figure 3.5-7 Local
● Click
to set the SD card as read only.
● Click
to set the SD card as read & write.
● Click
to realize hot swap upon the SD card.
● Click
to realize formatting upon the SD card.
3.5.2.3 FTP
You need to check the box to enable the FTP function. When network disconnect occurred or there is
malfunction, emergency storage can save the record/snapshot to the local SD card.
Step 1
,
Select “Setup > Storage > Destination > FTP”, the system will display the interface of “FTP” shown in
Figure 3.5-8.
Figure 3.5-8 FTP
Step 2
, Configure info of each parameter according to the actual needs; please refer to Table 3.5-2 for details.
