66
Parameter
Description
Enable FTP
Click it to enable FTP function
Server Address
FTP server address
Port
FTP server port
User name
User name used to log in FTP server.
Password
Password used to log in FTP server.
Remote Directory
Store it to the directory of FTP server.
Emergency (Local)
Click it and it will store to local SD card when FTP storage abnormity occurs.
Table 3.5-2 FTP Parameter Description
Step 3
, Click
to complete config.
3.5.2.4 NAS
When it selects NAS storage mode, NAS function can be enabled. You can store file to NAS server when
selecting NAS storage.
Step 1
,
Select “Setup > Storage > Destination > NAS”, the system will display the interface of “NAS” shown in Figure
3.5-9.
Figure 3.5-9 NAS
Step 2
, Configure info of each parameter according to the actual needs; please refer to Table 3.5-3 for more
details.
Parameter
Description
Enable NAS
Click it to enable NAS function.
Server Address
NAS server address.
Remote Directory
Store it to the directory of the NAS server.
Table 3.5-3 NAS Parameter Description
Step 3
, Click
to complete config.
3.5.3 Record Control
Step 1
,
Select “Setup > Storage > Record Control”, the system will display the interface of “Record Control”
shown in Figure 3.5-10.
