68
Step 2
, Configure info of each parameter according to the actual needs; please refer to Table 3.6-1 for more
details.
Parameter
Description
Device Name
It is to set device name. The default is the same to device serial number.
Language
You can select the language from the dropdown list.
Video Standard
It is to display the video format of device, PAL and NTSC, default is PAL.
Table 3.6-1 General Parameter Description
Step 3
, Click
to complete config.
3.6.1.2 Storage Path
The storage path is activated with snapshot and record in the live interface, which can set the storage path of
monitoring snapshot and monitoring record respectively.
The storage path is activated with snapshot, download and clip in the playback interface, which can set the
storage path of playback snapshot, record download and playback clip respectively.
Step 1
Select “Setup > System > General > Path”.
The system will display the interface of “Storage Path”, which is shown in Figure 3.6-2.
Figure 3.6-2 Storage Path
Step 2
, Set the corresponding storage path.
● The default live snapshot path:
C:\Users\Administrator\CameraDownload\LiveSnapshot
● The default live record path:
C:\Users\Administrator\CameraDownload\LiveRecord
● The default playback snapshot path:
C:\Users\Administrator\CameraDownload\PlaybackSnapshot
● The default playback download path:
C:\Users\Administrator\CameraDownload\PlaybackRecord
● The default playback clip path:
C:\Users\Administrator\CameraDownload\VideoClips
Note
: "Administrator" is locally logged in PC account.
Step 3
, Click
to complete config.
3.6.1.3 Date & Time
Step 1
,
Select “Setup > System > General > Date & Time”, the system will display the interface of “Date & Time” shown in
Figure 3.6-3.
