69
Figure 3.6-3 Date & Time
Step 2
, Configure info of each parameter according to the actual needs; please refer to Table 3.6-2 for details.
Table 3.6-2 Date & Time Parameter Description
Step 3
, Click
to complete config.
3.6.2 Account
3.6.2.1 Account
Only when users have the right of account management then can it realize account management operation.
● For the character in the following user name or the user group name, system max supports 15-digits. The valid
string includes: character, number, and underline.
● Password can be 0~32 characters in number and letter only. User can modify other user’s password.
● User management adopts group/user modes. The user name and the group name shall be unique. One user
shall be included in only one group.
● Currently logged in user cannot change his/her own right.
● There is one default user admin during initialization. Admin belongs to high right user by default when it is out of
factory.
3.6.2.1.1 User Name
You can enable anonymity login, add/remove user and modify user name and
etc. in “Setup > System > Account >
Parameter
Description
Date Format
Here you can select date format from the dropdown list.
Time Format
Here you can select the corresponding time format which needs to be displayed.
Time Zone
The time zone of the device.
System Time
It is to set system time. It becomes valid after you set.
DST
Here you can set begin time and end time of DST. You can set according to the date
format or according to the week format.
NTP
You can check the box to enable network time sync function
NTP server
You can set the address of time serve.
Port
It is to set the port of time server.
Update Period
It is to set the sync interval between the device and the time server.
