73
Parameter
Description
Start time
Set the start time of the requested log. (The earliest time is 2000/1/1)
End time
Set the end time of the requested log. (The latest time is 2037/12/31)
Type
Log type consists of system operation, config operation, data management, alarm
event, record operation, user management and log clear.
Search
First it needs to set start time and end time of the log to be searched, and select log
type, click “Search”, it will display search bars dynamically; click “Stop” to pause log
search, and it will display the searched bars and period area.
Log information
Click log record and it will display the detailed info of the log.
Clear
It is to clear all the log info on the device, but it fails to support classified clearance of
log info.
Backup
You can click this button to backup system log files which is searched to current PC.
Table 3.6-3 Log Parameter Description
Specific meaning included by different log types:
● System operation: It includes application program enable, abnormal logout, logout, application program
reboot, close/reboot device, system reboot, and system upgrade.
● Config operation: It includes save config, delete config file.
● Data operation; It includes setting hardware type, clearing data, hot swap, FTP status, record mode.
● Event operation (it is to record the events such as video detection, IVS, alarm, abnormity and etc.): It
includes event start and event end.
● Record operation: It includes file access, file access error, and file inquiry.
● User management (it is to record the user management modification and user login and logout): It includes
login, logout, add user, delete user, modify user, add group, delete group, modify group.
● Clear log: It is to clear log.
3.6.3.2 Default
Go to “Setup > System > Maintain > Default” and click “Default” to restore some device settings back to default.
The config interface is shown in Figure 3.6-10
Figure 3.6-10 Default
Import & Export
It can realize quick config of several devices via configuring file import and export when the config method of
several devices is the same.
Step 1
,
Select “Setup > System > Maintain > Default”. The system will display the interface of “Import & Export”,
which is shown in Figure 3.6-10.
Step 2
,
Click “Export” to export the config file (.backup file) to local.
Step 3
,
Click “Import” on the “Import & Export” interface of the WEB end of the device to be configured, and
import the file into the system. So far the device config is completed.
