WIZ127SR User’s Manual
13
Its response format is like below.
<S[IP Addr]>
[IP Addr] : Server’s IP address in a dotted decimal format
ex) <RX>
Response
<S192.168.0.115>
WN
Format
<WN[port]>
Meaning
Set Server’s port number to connect when the data socket is defined
as Client mode or Mixed mode.
[port] : Server’s port number in a decimal format.
Its range is 0 to 65535
ex) <WN5000>
Response
<S>
RN
Format
<RN>
Meaning
Get the current Server’s Port number
Its response format is like below.
<S[Port number]>
[IP Addr] : Server’s IP address in a dotted decimal format
ex) <RN>
Response
<S5000>
WR
Format
<WR>
Meaning
Restart WIZ127SR
Some commands need reboot of WIZ127SR in order that those
command affect to WIZ127SR’s configuration to operate properly.
So, we recommend you do use this command after all command you
issued, to guarantee WIZ127SR operate successfully.
ex) <WR>
Response
<S>
WV
Format
<WV[IP addr]>
Meaning
Set Domain Name Server’s IP address
If you want to use Server information in Domain name, not IP
address, then you should set Domain Name Server’s IP address
using this command. And the Domain Name
Server’s IP address
which you entered should be valid and operate DNS query
successfully.
[IP Addr] : Server’s IP address in a dotted decimal format
<WV8.8.8.8>
Response
<S>
RV
Format
<RV>
Meaning
Get the current Domain Name Server IP address
Its response format is like below.
<S[IP Addr]>
[IP Addr] : Server’s IP address in a dotted decimal format
ex) <RV>
Response
<S
8.8.8.8
>
WW
Format
<WW[Domain name]>