WIZ127SR User’s Manual
19
08 (1)
Serial data size (08: 8 bit), (07: 7 bit)
00 (1)
Parity (00: No), (01: Odd), (02: Even)
01 (1)
Stop bit
00 (1)
Flow control (00: None), (01: XON/XOFF), (02: CTS/RTS)
00 (1)
Delimiter character
0000 (2)
Delimiter size
0000 (2)
Delimiter time
0000 (2)
Delimiter inactivity time
00 (1)
Debug code (00: ON), (01: OFF)
03 (1)
Software major version
01 (1)
Software minor version
00 (1)
DHCP option (00: DHCP OFF, 01:DHCP ON)
00 (1)
UDP mode (00: TCP; 01: UDP)
00 (1)
Connection Status (00:not connected, 01: connected)
00 (1)
DNS Flag (00:not use DNS, 01:use DNS)
00000000 (4)
DNS Server IP address
00……00 (32)
Server Domain Name
00 (1)
Serial command method(00:disable, 01:enable)
2B2B2B (3)
Serial command mode character(Hex)
002020……2020 (32)
PPPoE ID
002020……2020 (32)
PPPoE Password
00 (1)
Password option for TCP Server (00:disable, 01:enable)
0000000000000000 (8)
Password for TCP Server
FF
Last Byte (It means end of parameter)
Table 11. Hardware Configuration Parameter descriptions
3.2.4.2.
Reply Frame Format
Frame Format
Descriptor
STX
Reply code
Parameter
ETX
Length(bytes)
1
1
Variable
2
Command
‘<’(0x3C)
S
Variable
‘CR’’LF’(0x0D0A)
Table 12. Hardware Configuration Reply Frame format
Reply for Entrance Hardware Command Mode (Hex : 0x3B)
[Normal mode]
;
[Debug mode]
WIZ127SR bootloader
Ver. 1.0