Steps to install the FPV set on your copter:
1. screw the antenna (1) on the FPV monitor (2)
2. Install the sun block cover (3) on the FPV monitor for better
visibility during sharp sunlight.
3. Mount the FPV monitor (2) on remote (5) by using the FPV
mount bracket (4) and screw set.
4. Turn the monitor on on the right side and then the camera
which is mounted to the copter. Make sure the Antenna of the
camera is extended and connect the camera to the FPV socket
of the copter.
Imported by: WLtoys.eu / DroneX BV
Bloemstraat 86HS 1016 LE Amsterdam | www.wltoys.eu |
info@wltoys.eu
Our products comply with the standards and criteria of the
European Union and approved by the EC. For your safety, we
recommend that you read the entire manual before your first
flight.
• Overloading the vehicle or external influences
Wltoys
Warranty
• Homemade modifications on the product
This warranty covers manufacturing and material defects in the context of normal use. We take no responsibility for damage
caused indirectly.
• Extreme treatment which can not be contained in the usual standards
The use of this product is entirely at your own responsibility and at your own risk. Since we have no control beyond this manual on
when and how you use our product (both flying and maintenance), we are not responsible for any damages or costs incurred by
improper use.
• Normal wear and tear of the device and parts
• The costs of transportation, shipping or insurance
Congratulations on your purchase of this product from wltoys.eu! Wltoys.eu offers its customers a high quality product. All our
products are carefully tested before shipment. If unfortunately a problem persists, contact your dealer or visit www.wltoys.eu. Your
dealer can also assist you in getting spare parts in case you need them. We hope you will enjoy your experience with our product.
You can contact us at any time on : www.wltoys.eu | support@wltoys.eu.
You can find instructional videos and buy spare parts on our website www.wltoys.eu.
For technical support contact your reseller.
• Damage caused by the failure to comply with security measures or instructions
• The damage caused by the humidity
The following are excluded from the warranty:
• Electric defects due to voltage overload or lightning
WARNING:
Non-compliance with safety rules may cause damage, injury and / or dangerous situations.
• The damage caused by the loss of control of the vehicle
Copyright WLtoys.eu | DroneX BV
