46
User Manual WMF 1100 S
Software | Beverages
S-M-L Function
The S-M-L function can be activated in the System
menu. The cup volume can also be set to a different
general level for all beverages using the operating
options.
For individual beverages that deviate from the
standard, the S-M-L quantity can be changed under
cup volume.
Each size can also be individually set to active or
inactive. Inactive means that the size no longer
appears as a selection for the individual beverage.
Cup volume S-M-L
The recipes for the sizes S and L are generated.
M is as set.
Default value:
S = 25 % less than the setting.
L = 25 % more than the setting.
Multiple brewing cycles
The beverage is brewed several times, as set. Up to
12 times the set quantity can be dispensed with one
push of a button.
Available for beverages with coffee and with milk
mixtures, as well as for hot water with the “metered”
dispensing option.
Dispensing option
•
Start-Stop
The dispensing runs until the set
volume is reached. The dispensing
can be stopped sooner by pressing
the button again.
•
Metered
The set volume is dispensed. The
dispensing option is available for
milk, foam, and hot water.
•
Freeflow
The beverage or steam is output for as
long as the button is pressed and held.
•
Start-Stop-Freeflow
A brief press of a button starts
start-stop dispensing.
A longer press of the button, for
more than 1 second, starts freeflow
dispensing.
Activate S-M-L and make a change
for all beverages
w
System
w
S-M-L
Special buttons
w
Operation
%
S-active
Active
L-active
S
M
L
72
73
74
75
76
77
78
97
98
99
100
101
102
103
122
123
124
125
126
127
128
DI_03_05_02_00
Change S-M-L for individual
beverages
w
Cup volume
