background image

60

User Manual WMF 2000 S   

Safety

We recommend damage prevention measures such as:  

• 

- installation of a suitable water monitor in the mains 
water supply  
- installation of smoke alarms 
After a company holiday we recommend running 

• 

the cleaning mode at least twice before reusing the 
machine.

9.3 

Directives 

The machine fulfills the requirements of the Regulation on 
Commodities (and counterparts in the European Plastics 
Directives) and the EC regulation No. 1935 / 2004 in the 
currently valid edition.
When used properly, the machine does not present 
a hazard to health or other unjustifiable hazard.
The materials and products used comply with the 
Regulation on Commodities (and counterparts in the 
European Plastics Directive 2002 / 72 / EG ff.)
The machine fulfills the requirements of all applicable 
regulations in the directives MD (MR) 2006 / 42 / EC (EG), 
EMCD (EMV) 2004 / 108 / EC (EG), Directive 2002 / 95 / EC 
(ROHS), Directive 2002 / 96 / EC (WEEE). 
The declaration of conformity is included with the 
machine. The machine bears the CE mark. 
Any modifications that are not approved by WMF will 
cause this declaration to become invalid.
Currently valid national rules apply in countries outside of 
the European Union.
This device is subject to the directive on waste electrical 
and electronic equipment (WEEE / EU directive) and may not 
be disposed of as domestic waste.

 

w

 Cleaning instructions

 

For disposal please contact the 
WMF Service.

Summary of Contents for 2000 S









































































Reviews: