90
If coffee has already been brewed into the storage reservoir,
the display shows the current level in the reservoir. In this
example, the pre-selection is half full and the storage
reservoir contains 1.3 litres of coffee:
Note:
Up to 3.0 litres of the actual contents of the storage
can be displayed.
The quantity of coffee currently stored in the storage
reservoir is displayed in litres in
every
quantity pre-
selection stage (except for coffee machines in self-service
operation mode, see chapter 8.4.2 on page 105).
Full
3.0 litres are transferred to the storage reservoir to
begin with. If the coffee level in the storage reservoir
falls below 2.3 litres, the WMF Cafemat 2 starts an
automatic refill brewing of fresh coffee (0.75 litres).
Should the coffee level fall below 0.75 litres, coffee
dispensing is disabled.
No more coffee will be dispensed until refill brewing of
fresh coffee has taken place.
Press
to confirm your selection.
6.6.2
Manual quantity control
Stand-by (zero litres)
This setting should be selected if you want to empty the
storage reservoir completely and no refill brewing is
required.
Coffee stored in the reservoir will continue to be
dispensed until the level reaches approx. 0.3 litres, at
which time dispensing will be disabled. The remaining
coffee can then be dispensed manually (see chapter 7.9
on page 120)
Press
to confirm your selection.
If you choose “
Stand-by (zero litres)
” as the quantity
pre-selection, the display shows.
