92
6.8
Coffee Dispensing by Fresh Brewing
(not possible on machines without fresh brewing option)
Caution!
There is a
danger of scalding
in the area of the
coffee spout
5
and
16
!
When the corresponding beverage key is pressed, a
brewing cycle begins, using the specified quantities of
ground coffee and brewing water.
On machines with an integral storage reservoir and the
fresh brewing option, a coffee beverage can be freshly
brewed without passing through the storage reservoir.
This can be useful if:
1. the storage reservoir has already been emptied but
coffee is still required.
2. a coffee beverage is required which has to be prepared
using a different type of ground coffee which is in the
ground coffee hopper.
If the ground coffee hoppers have been filled and the
machine is ready for operation, coffee beverages can be
dispensed by pressing a beverage key.
The display shows the following:
Only the beverage keys for beverages that can be dispensed
at the time are active. Otherwise, please refer to the
messages in your WMF coffee machine display.
Press the appropriate beverage key.
2.
While brewing is taking place the name of the coffee
beverage selected and the progress of brewing are
indicated in the display by a cup filling up. Quantity
pre-selection is possible (see chapter 6.9, page 93).
The used coffee grounds are collected in the integral grouts
collector
15
. All the beverage keys are now activated again
and the display shows that the machine is ready. The
machine is now ready for the next brewing cycle.
