93
6.9
Quantity Pre-selection
Each beverage selection can be repeated automatically up
to
12 times
if required. After starting the first brewing
cycle, the quantity pre-selection (number) for the beverages
to be dispensed can be altered upwards
or downwards
by pressing the corresponding keys.
In the example shown here, one cup of coffee has been
selected and the number increased to 6 by means of
quantity pre-selection. In each case, the quantity pre-
selected and the progress of brewing are indicated (in this
example, the first of six brewing cycles is taking place).
Six brewing cycles are now carried out one after the other
or dispensing from the storage reservoir takes place six
times,
without
pausing. The pre-selected quantity is
dispensed from the storage reservoir
all at once
. We
recommend that you only set up a pre-selected quantity if a
certain quantity of a beverage has to be dispensed into a
jug, for instance. The quantity pre-selected can be changed
while brewing is in progress. Once all the brewing cycles
have been carried out, the display indicates that the
machine is ready again.
6.10
Manual Input
(on machines with an integral storage reservoir, this requires the fresh brewing option to be
implemented)
To enable different types of coffee such as mild coffee or
decaf to be prepared, the machine has a function that
allows ground coffee to be input into the brewer by hand.
The procedure for manual input is as follows:
1. The machine is ready and the display is as shown here
on the right. Place the appropriate containers
underneath the spout. Then press the
button to
start the Manual Input sequence.
2. After the brewer has travelled to the input position, a
prompt appears in the display asking you to open the
front door, input ground coffee and then close the front
door again.
Caution!
Take care not to trap your fingers when opening and
closing the front panel. Beware of the
danger of
crushing
.
