100
7.1
Beverage Settings
The machine is ready for operation and the following
display is shown:
By pressing the
soft key you can access a second
level, where there is a Selection menu in which beverage
settings can be made.
If you have allocated access authorisations (PIN numbers -
see chapter 8.5, page 107), on pressing the
soft key
you will be asked for your PIN number. When the correct
PIN number is input, the Selection menu is displayed
according to your authorisation.
If you would like to change the settings for your coffee
beverages, press the
soft key in the Selection menu.
In the following menu you can choose whether you wish to
alter your beverage settings.
On machines with a storage reservoir you can also set
storage reservoir brewing and on machines with a multi-
brew arm, you can set multi-brewing. This menu also
allows you to alter the machine settings, set the time and
alter the display contrast or to start the first run. Start by
selecting the
Beverages
soft key.
The following display appears:
Then select the beverage key on the control panel for the
beverage that you would like to change.
You are now in the setting mode for the beverage selected
and, according to the beverage, you can alter the quantity
of ground coffee, the quantity of water and the key
allocation for the beverage concerned.
Press the
soft key to scroll to the next settings page, or
press
to scroll back one page.
