124
This setting then appears as a symbol in the display:
Switch ON
Î
Switch OFF
Î
Cl OFF
Î
Press the
OK
soft key to confirm your selection.
A programmed switching time can be cleared by pressing
the
C
soft key.
If you use the Plus (up arrow) and Minus (down arrow)
keys in the “Action” column, after scrolling through the
setting options in Operating Time mode, you will
automatically move on to the setting options in other
modes, such as Cleaning mode (see chapter 8.1.3 on page
127), Pre-selection (see chapter 8.1.2 on page 125) or Self-
service mode (see chapter 8.1.4 on page 128).
The column heading “Prg” denotes the 16 switching times
that can be set for each day. Once you have pressed the
OK
soft key to confirm the desired action, all the programmed
switching times will automatically be sorted in to
chronological order.
By pressing the
soft key in the display, you can access
the Timer Check directly.
