129
In the following menu you can set the day, time (for an
example, see chapter 8.1.1 Setting the operating times
on
page 122) and the action you wish your coffee machine to
perform.
Under the column heading “Action” you can select the
various possible settings.
Touch the centre of the symbol panel to see all the options
that can be set in Self-service mode in white text, with the
function already selected in black text, highlighted in
white.
In Self-service mode, you can program the self-service
options:
-
Switch on or
-
Switch off.
To do this, touch the setting you want.
That setting then appears as a symbol in the display:
S.Serv.Mode OFF
Î
S.Serv.Mode ON
Î
Press
OK
to confirm your choice.
A programmed switching time can be cleared by pressing
the
C
soft key.
If you use the Plus (up arrow) and Minus (down arrow)
keys in the “Action” column, after scrolling through the
setting options in Self-service mode you will automatically
move on to the setting options in other modes, such as Pre-
selection mode (see chapter 8.1.2 on page 125), Operating
time (see chapter 8.1.1 on page 122) or Cleaning mode (see
chapter 8.1.3 on page 127).
The column heading “Prg” denotes the 16 switching times
that can be set for each day. Once you have pressed the
OK
soft key to confirm the desired action, all the programmed
switching times will automatically be sorted in to
chronological order.
By pressing the
soft key in the display, you can access
the Timer Check directly.
