130
8.2
Timer Check
To check your programmed switching times in the
Timerprogram, press the Clock symbol
in the
Selection menu .
The following display appears:
Then press the
Timer Table
soft key.
You can now display the preset operating times or your
programmed pre-selection settings in the timer check.
On pressing the
Running Time
soft key, the following display
appears:
In the following example, from Mondays to Fridays (1-5)
the machine switches on automatically at 07:00 and
switches off again automatically at 20:00, after carrying out
cleaning. On Saturdays, the machine is operational from
08:00 to 16:00 and on Sundays, from 09:00 to 18:00.
Cleaning is carried out at the end of each day.
On pressing the
Preselection
soft key, the following display
appears:
In the following example, different quantity pre-selections
have been programmed for Monday to Friday (days 1-5).
The thickness of the white bar indicates the level in the
storage reservoir, according to the pre-selection chosen. In
this example, the pre-selection has been programmed for a
higher setting between 14:00 and 16:00 each day.
