80
3
Warnings
Maximum machine safety is an integral WMF product characteristic to which we pay particular
attention.
In spite of all our safety precautions, every machine is potentially hazardous if not operated properly.
This is why – for your own safety – we have summarised the warnings below and highlighted them in
grey throughout the instruction manual.
This is why it is important to follow the “Safety instructions” given on page 81.
Important instructions which
must be observed for your
own safety
Connection and commissioning of the coffee machine may
only be undertaken by the WMF customer service team.
Maintenance and repair work on the machine
may only be
undertaken by the WMF customer service team using
original spare parts.
Installed safety devices
must not be altered for any reason
.
No parts of the outside of the machine should be removed.
Caution! Risk of being burned and scalded
At the spout where hot water
12
and coffee
5
,
16
comes out
there is a risk of being burned and scalded. Always ensure
that there is container placed under the drinks spout! Ensure
that the container is stable and do not leave it unattended.
After switching on it is possible that hot water comes out of
the hot water-
12
and coffee spout
5
,
16
during the warm
brewing phase. Never reach under the spouts while cleaning
is in progress.
Caution!
Health hazard!
Follow the
precautions on the packaging
when using the
cleaning product. The cleaning granulate is an irritant.
Cleaning fluid flows out of the coffee spout
5
while cleaning is
in progress. The protective panel provided should be fitted (see
picture on page 136). Do not leave jugs or cups underneath the
coffee spout
5
while cleaning is taking place. Wait until
prompted by the display before placing cleaner granulate in the
brewer.
Caution! Danger of crushing!
Never put your hand into the ground coffee hoppers
2
/
7
or
the granulate cleaner reservoir
8
when the machine is in use
and the power is switched on!
Caution! Electric shock hazard!
Moisture can cause short circuits. It is therefore essential not
to allow fluids to enter the inside of the machine housing .
Under no circumstances should the machine be opened up.
Never put your hand inside the machine interior or reach
inside with a tool.
