WMH Tool Group PERFORMAX 22-44 Plus, Owner'S Manual

6

Introduction 

This manual is provided by Performax covering the safe operation and maintenance procedures for Model 
22-44 Plus Drum Sander. This manual contains instructions on installation, safety precautions, general 
operating procedures, maintenance instructions and parts breakdown. This machine has been designed and 
constructed to provide years of trouble free operation if used in accordance to instructions set forth in this 
manual. If there are any questions or comments, please contact either your local supplier or WMH Tool 
Group. WMH Tool Group can also be reached at our web site: 

www.wmhtoolgroup.com

. 

Specifications 

 
Stock Number ...................................................................................................................................649003K 
Max. Width (in) .......................................................................................................................44 (two passes) 
Min. Length (in) .......................................................................................................................................2-1/4 
Max. Thickness (in) ....................................................................................................................................... 4 
Min. Thickness (in) ................................................................................................................................... 1/32 
Drum (in) ............................................................................................................... 5x22 Extrusion, Aluminum 
Drum Speed (RPM)................................................................................................................................. 1700 
Dust Chute (in) .............................................................................................................................................. 4 
Conveyor Motor..............................................................................43 inch-lb torque, direct drive D.C. motor 
Conveyor Variable Feed Rate (FPM)................................................................................. 0-10 (SandSmart) 
Motor (TEFC) ........................................................................................................ 1-3/4 HP, 1Ph, 115V Only 
Net Weight (lbs) ........................................................................................................................................ 231 
Shipping Weight (lbs) ................................................................................................................................ 254 
 
 
 
The specifications in this manual are given as general information only, and they are not binding. WMH 
Tool Group reserves the right to effect, at any time and without prior notice, changes or alterations to 
parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.