HSDPA
User’s Manual
WMOCEAN +420 225 371 777
http://www.wmocean.com
p. 26
5.2 LAN
This group features three pages of settings related to the local wireless or wired network (for
IP, for the embedded WiFi access point and respectively for the DHCP server):
5.2.1. IP Settings
Settings for the LAN IP of the HSDPA router are the standard ones: IP Address
and Netmask. These settings control how the WMOCEAN equipment connects into your
local wired (Ethernet) computer network.
The default value of the address is 192.168.1.1 and the netmask is the standard one,
255.255.255.0. The network mask allows limiting the accessibility domain for the address
above.
You may change these default settings, if the configuration of your network requires this. Use
the “Save” button to save the settings, then “Commit” (down on the column to the left of the
screen) to make permanent the IP settings.
Usually the IP address allocated for HSDPA on the LAN side is a non-routable
(internal) address. If you change this IP address, you will need to reload the configuration
page by typing the new IP address in your browser, if not redirected automatically.