HSDPA
User’s Manual
WMOCEAN +420 225 371 777
http://www.wmocean.com
p. 45
5.5 SYSTEM
Shows the status and logs and allows you to perform several system-related operations.
The system configuration pages include these settings:
-
Status, displays the current status of the HSDPA equipment
-
Logs, shows the log file
-
Update, you may perform firmware update
-
Password, allows modification of the password
-
Defaults, restores the factory default settings
-
Save, saves the current configuration of
-
Load, loads a stored configuration.
5.5.1. Status
Shows the status of the HSDPA system:
This page displays information about the following items:
-
version of the firmware running on : you may see “Firmware version is
0.3.7” or “0.5.6 –HSDPA-P” in the above example, and so on
-
state of the HDSPA terminal (3G modem): connected or disconnected
-
state of the PPP data link: online (active) or offline; if it is online, the IP allotted by
your provider will be also shown, such as “127.20.38.128” or “80.97.185.70”
-
state of USB webcam: connected or not
-
System uptime: time since the last restart of the equipment, both in full
format (hours:minutes:seconds) and short format (up 1 minute)
-
Load average: “0.06, 0.04, 0.01” - info about system loading (maximum value /
average value / number of active processes)
-
DHCP Leases: info about temporary IP address obtained from DHCP server,
including MAC, IP, name, validity period, etc – such as “946728080 00:0f:57:23:5e:2c
192.168.1.73 fane40 01:00:0e:35:22:5e:2c”.