HSDPA
User’s Manual
WMOCEAN +420 225 371 777
http://www.wmocean.com
p. 61
-
ID (reference number: 1, 2, and so on up to 14),
-
STATUS (REC for Received, READ means the message has been read, while
UNREAD means it was not read ),
-
FROM (the phone number of the sender) such as “+420602909909”,
-
DATE (date and time in normal format: two digits for year, month, date of the month,
hour, minutes, seconds and after the “+” sign the tenths of seconds),
-
and finally TEXT, where you can see the text of the message.
You may delete one or several messages by typing the index in the box at the bottom and
clicking “Go”.
Note: The maximum storage capacity is 15 messages (ID’s 0 to 14).
When you already have 15 SMS stored in memory, the equipment won’t be able
to receive newer SMS.
If you want to continue receiving messages, you must delete some of the older SMS.
Look at the “DATE” field and delete the messages that you no longer need.
After deletion, click again “SMS Read” to read messages from the server.
The new message will be displayed, at first at the bottom of the list, and upon next “Read”
command it fill be sorted upon the “ID” field and placed in its proper position.
In this example, several messages have been
erased to make place. Another SMS has been
received and displayed with the index “4”,
replacing one of the deleted messages.
Upon next Read operation, the equipment performs sorting by ID, and the newest
message is shown in the proper place with ID “4”, although its date is different from the
previous group of messages.
5.7.4 SMS Send
This option allows you to send out a SMS message through the mobile network.
Just type in the destination phone number in the field “To” and the text you want to transmit
in the field “Message”, then click the Send button.
Then wait about 40 seconds for the mobile network to perform the sending operation.
If the SMS cannot be send (network busy, congestion or other problems), an error messages
will be shown on top of the screen.
Note: if the phone number that is destination for the SMS is in the same network, you may
enter it in short form, as above. But if it is in a different mobile network, you must type it in full
format: country code, area code, number, for example “+40747999999”.