2-2
Chapter 2: Installation
November 2007
Preparation
This section provides instructions for preparing the game.
ESD Prevention
Depending on the procedure, measures must be taken to prevent electrical shock and/or
electrostatic discharge (ESD) when servicing the game. See
About This Guide
chapter for details on ESD prevention.
Install Game onto
Stand
Complete the following steps to mount the game. WMS recommends using the plastic Bluebird Drill
Fixture (31-010020),
. To obtain the fixture, contact WMS Field Service.
CAUTION: The maximum weight for any BBU game is 452 lbs (205 kg). Verify that any non-WMS
game stand specifications meet this weight requirement before mounting the game. Using
inadequate game stands voids the WMS Warranty and may lead to distortion of the game cabinet,
including the inability to close and lock the Main Door.
Figure 2-1 Bluebird Drill Fixture.
NOTE:
Space the games at least 6" apart.
1
Use one of the following three methods to:
Attach the game drop stand to the floor with carriage bolts.
Mount machines back-to- back on a common stand.
Mount machines on separate stands, but bolt the bases together back to back.
CAUTION: Improper mounting can cause the stand to tip over, risking damage and injury.
2
WMS recommends using the Drill Fixture to drill four anchor clearance holes and two access
holes into the top of the stand. Position the template by setting it flush with the back of the drop
stand, then centering it.
FRONT OF GAME
BACK OF GAME
Summary of Contents for Bluebird Series
