4
9. MAINTAIN TOOLS IN TOP CONDITION
Keep tools sharp and clean for best and safest performance. Follow
instructions for lubricating and changing accessories.
10. DISCONNECT TOOLS FROM POWER SOURCE.
Before serving and when changing accessories such as blades, bit cutters
or when mounting and remounting motor.
11. AVOID ACCIDENT ATARTING.
Make sure switch is in “OFF” position before plugging in cord.
12. USE RECOMMENDED ACCESSORIES.
Consult the owner’s manual for recommended accessories. Use of
improper accessories may be hazardous.
13. NEVER STAND ON THE TOOL.
Serious injury could occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
14. CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is damaged
should be carefully checked to ensure that it will operate properly and
perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part is damaged
should be properly repaired or replaced.
15. NEVER LEAVE TOOL RUNNING UNATTENDED
Don’t leave tool until it comes to a full stop. The operation of any power
tool may result in some objects being thrown into the eyes, which can
result in severe eyes damage. Always wear safety glasses or eye shields
before using your lathe. We recommended wide vision safety mask or
standard safety glasses.
