5
SAFETY RULES FOR THE LATHE
Safety is a combination of operator’s common sense and alertness at all times
when lathe is being used. Study these safety rules and general safety rules
before operating and retain for further use.
1. wear eye protection.
2. never attempt any operation or adjustment if procedure is not understood.
3. keep fingers away from revolving parts and cutting tools while in operation.
4. never force cutting action.
5. never perform an abnormal or little used operation without study and use of
adequate slipper blocks, jigs stops and fixtures etc.
6. use of shop manual such as “machinery’s Handbook” or similar is
recommended for cutting speeds, feeds and operation details.
7. do not remove drive cover while machine is in operation. Make sure it is
always closed.
8. always remove chuck key, even when machine is not in operation.
9. do not attempt to adjust or remove tools when in operation.
10.always keep cutters sharp.
11. never use in an explosive atmosphere or where a spark could ignite a fire.
12.always use identical replacement parts when serving.
