Pull out/install while slightly rotating the massage head. For attachment of the
U-shaped head only, align notch on massage head with line on device
Massage heads removal/installation:
Charging
Maintenance, cleaning, storage & transportation
�
Charge the battery for three hours before the first use.
�
Connect the DC end of the supplied charger to the charging port on the
massager. Plug the AC end into electrical wall outlet.
�
The LED indicators on the device will light showing battery level and will flash
while charging. The battery information displayed by the indicator light is as follows:
�
Clean the device with a slightly damp cloth and dry with a soft cloth.
�
Place device back in carry case when storing or traveling.
�
Store in a dry and well ventilated place.
�
For long term storage, thoroughly clean device and charge every 6 months.5.
This device is suitable for travel by car, plane, train, ship and bus as long as it is
properly stowed and secured.
�
Speed/force indicator:
There are a series of 4 indicator lights which measure
percussive speed and force. The lights are indicated in WHITE for percussive
speed when no pressure is being applied to the massage head. To adjust
percussive speed, press and hold the power button for one second to turn on the
device. Choose the desired percussive speed 1-4 by pushing the power button
repeatedly. Once force is applied to the massage head, the light indicators will
turn green to indicate force.
�
Battery indicator:
After turning on the product, 4 lights are on indicating 80%-100%
power. 3 lights indicate 50%-80% power. 2 lights indicate 30%-50% power. 1 light
indicates power is low and needs to be charged.
