14
6.2 Keystroke explain and operation procedure.
按键功能说明及操作流程简介
All of the operation should switch on the safety power, it beep once when press every key.
所有操作均需接通安全开关,每一个按键按下时,发出一声
“
Bi
”的响声。
Step 1
:
Program keystroke
第一步:程序(“
” or “
” ;“
” or
“
”
)键
,
Choose the exercise mode you needed by the program keystroke on the panel, the selected exercise mode will
display such as
“P1~P11”
on the computer LED , at the same time the dot matrix display the corresponding
description and map.FAT test is the last program and "FAT" is displayed on the dot matrix of the computer
面板中的程序键(FAST or SLOW ;UP or DOWN)来选择我们所需的运动模式,选定的运动模式将以“P1~P11”的
方式显示在仪表的 LED 中,同时点阵将显示相应的名称或山形图。脂肪测试为最后一个程序“FAT”显示在仪表
点阵上。
(1)P1
manual mode
:
system makes the basic exercise speed (0.8km/h) and height (0), all the value will be set
by the exerciser, the dot matrix on the computer will record the exercise data.
P1 手动模式(MANUAL):在该模式下,系统只给出了最基础的运动速度(0.8k
m/h
)和高度(0),一切数值都
将靠运动者来自我设定,在仪表的点阵上将会留下运动者的运动轨迹。
(2)P2~P8:
different graph the express speed of the different time to decide the exercise.
P2~P8:以不同的山形表示不同时间点的速度来进行运动。
( 3)
Speed routine of every segment, as the following:
各段程序速度行程(共 24 段)说明如下: