7
-
Bolt all the parts together loosely at first, and check that they have been assembled correctly. Then use
spanner to finally tighten bolts completely. Then check that all screw connections have been tightened firmly.
请先用螺丝固定所有的部件但先不要锁紧,然后检查是否安装正确,用扳手将螺丝完全锁紧。最后检查是否所
有的螺母都已经完全锁紧。
-
For technical reasons, we reserve the right to carry out preliminary assembly work. (E.g. addition of tubing
plugs)
由于技术原因,我们保留执行初步安装工作的权利。
(
例如:安装管塞
)
-
Please keep original packing of this article, so that it may be used for transport at a later date, if necessary.
如有必要请保留该器材的原始包装,以备您今后运输时使用
1.4
Order of spare parts
配件定购
-
When ordering spare parts, always state the full article number, spare part number and quantity required.
定购配件的时候,请注明完整的货号,配件号,描述和所需数量。
-
For example: Article No.:6000A Spare part No.
:
15 / Left rear cap / 1 pc.
订单例子:货号:
4000A
配件号
:
15 /
左护脚
/ 1
个。
-
Important:
spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)
is required, this should be clearly stated on the order by adding the words
“with fastening material”
注意
:
配件的价格并不包含紧固件的价格;如果需要紧固件(如螺栓,螺母,垫圈等)请在订单上详细注明:
“
带紧固件
”
1.5 Parts Checklist
部件清单
上仪表组件:
车架组件:
Up Console Main frame part
1.6 Hardware
Checklist
螺丝包清单