Manual_S5_Airplus_2015_04_20
Page 65 / 68
©
Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015
Part No. 950 976
22
Proper Use
22.1 Fuel
The Pellet Primärofen units of the PO 03 series may only be operated with wood pellets that conform to the DIN EN
14961-2 Class A1, ENplus-A1 or DINplus standards/quality criteria and have an ash content of less than 0.7%.
The following may not be used: cut firewood or other combustible or waste materials. If the furnace is not operated with
approved fuels, any warranty or guarantee claims are void and dangerous operating conditions may result.
22.2 Installation Room
The Pellet Primärofen units of the PO 03 series may only be installed in residential spaces with ordinary impurities,
normal relative humidity (dry rooms according to VDE 0100) and with room temperatures from +5 °C to +30 °C (envi-
ronmental temperatures during operation). The installation room or combustion air connection for the Pellet Primärofen
units of the PO 03 series must have at least 4 m³ of volume per kW nominal heating output. Please observe the
specifications on fire protection regulations in the enclosed assembly instructions!
22.3 Installation and Assembly
Work, such as particularly installation, assembly, initial commissioning and service work as well as repairs may only
be performed by a trained, specialist company (heating or hot air heating construction).
22.4 Modifications
Attention, risk of fire!
In case of modifications to the unit!
No modifications may be made to the unit. In case of modifications, any warranty or guarantee claims are
null and void and dangerous operating conditions can arise.