background image

 
 
 
 

 
GMF-S01 Operation manual 

Page 28 of 31 

B0836 

 

9.  Return shipment to factory 

 
The safety and health of our staff, the ordinance on hazardous materials (the german 
GefStoffV), the regulations pertaining to the safety at the places of work, and the regulations 
governing the disposal of waste oils necessitate the completion of the "Document of 
compliance" form for all products that are to be returned to us. 
Without submission of the fully completed form, no return shipment can be accepted and 
processed. 
 
To ensure speedy handling, you are kindly requested to send a copy of the fully completed 
declaration of compliance to us in advance. The original must be attached to the freight 
documents. 
 
For damage assessment and in order to be able to perform the repair quickly and economi-
cally, we furthermore need a detailed description of the complaint and conditions of use. 
 
Cost estimates will be made on explicit request and with charge only. 
 
In case of repair order placement or acquisition of a new product instead of repair, the 
incurred costs will not be charged. Respectively charged costs will be settled. 
 
If, due to the cost estimate, you do not want any repair, we will send the product back 
unfranked and in dismantled condition, if necessary. 
 

For product shipment, the following should be ensured: 
 

 

The product must be discharged and clean. 

 

All openings must be closed. 

 

The product must be packed safely and marked completely. 

 

The declaration of compliance must be attached. 

 

Summary of Contents for GMF-S01
































Reviews: