821042: RMT-170e Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
14
RMT-170e HD Series User Guide
Front Panel Controls
•
SDI Input 1/2 (Button/Indicator)
: This indicator glows green when
this input is selected for display on the monitor. As a control, this
button selects the SDI signal for display to the monitor.
•
Line 1/2 (Button/Indicator)
: This indicator glows green when this
input is selected for display on the monitor. As a control, this button
selects the signal for display to the monitor. You can select from
three signal types for Line 2 in the
USER CONFIG
menu of the
OSD
Menu
.
•
DVI-I (Button/Indicator)
: This indicator glows green when this
input is selected for display on the monitor. As a control, this button
selects the signal for display to the monitor. Select from three signal
types in the
USER CONFIG
menu of the
OSD Menu
.
•
Aspect (Button/Indicator):
This indicator glows green when a non-
default aspect ratio has been selected for this signal. As a control,
this button toggles between 4:3 and 16:9.
•
F1 through F6 (Buttons/Indicators)
: These indicators glow
greenwhen the associated function is active.
•
Status (Button/Indicator)
: Pressing this button toggles the status
display (not a menu) on and off to the monitor. If the button is not
pressed a second time, the status will disappear after several
seconds.
OSD Menu Buttons
•
Menu (Button)
: Pressing the
Menu
button displays the OSD menu.
Refer to
Using the OSD Menu on page 19
for more details.
•
Up/Down (Buttons
): Pressing these buttons after pressing the
Menu
button navigates through the menus and submenus up or
down respectively. Neither of these buttons functions when the
OSD Menu
is not displayed on the monitor.
•
Enter (Button)
: The
Enter
button selects menus, submenus, and
option values in the
OSD Menu
. When the
OSD Menu
is not
displayed on the monitor, this button displays F1 to F6 functions
assignments.
