821042: RMT-170e Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
17
RMT-170e HD Series User Guide
Rear Panel Connectors
•
SDI Inputs 1 and 2
: SD-SDI input signal on BNC jacks.
•
SDI Output
: Output jack for selected SDI signal.
•
Line 1 (Video)
: Input jack for analog composite video signal only.
•
LINE2 (Video/Y)
: Input jack for analog composite video input
signal, or luminance (Y) signal of Y/C or YPrPb.
•
Line 2 (C/Pb)
: Input jack for Chroma (C) signal of Y/C or Pb (Blue)
component of YPrPb.
•
Line 2 (Pr)
: Input jack for Pr (Red) component of YPrPb.
•
Config I/O
(on DB-9): Remote connector for factory programming
and configuration access.
Figure 1–5
DB-9 Connector Pin-Out
Table 1–10
GPI/Tally Lamp Color/Pin Designations
Tally Lamp Color
GPI 1 Pin
GPI 2 Pin
Green
GND
Open
Red
Open
GND
Orange
GND
GND
Table 1–11
GPI/Tally Lamp Connector Pin Out
Pin
Function
1.
GPI 1
2.
GPI 2
3.
GPI 3
4.
GPI 4
5.
GPI 5
6.
GPI 6
7.
No Connection (NC)
8.
Ground
