821042: RMT-170e Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
4
RMT-170e HD Series User Guide
FCC Compliance
3.
Use the included screws to attach either option. The table stand
attaches on the rear bottom of the unit and the rack ears attach to the
sides.
4.
Use the included M3 x 12 mm screws to attach the optional battery
mount, attach it to the rear of the monitor.
5.
Place the RMT-170e HD Series monitor in the required location for
operation.
6.
Connect the required signals. For BNC connections use 75
-rated
connectors.
7.
Connect A.C. mains power using the included EIC power cord. Please
ground the unit to ensure proper operation.
8.
Turn on the mains power using the toggle switch located on the rear of
the RMT-170e HD Series monitor above the power connector.
FCC Compliance
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Features
The RMT-170e HD Series monitors are 17" multiple function TFT-LCD
monitors with 1366 x 768 screen resolution (16:9 native aspect).
Interlaced signals are processed by using a 3D comb filter and 3D
