Setup
7.4
Setting the CO
2
alarm limit
Fig. 1 O: Setting the alarm limit
�
NOTE!
In the P 1.3 mode the current set value will be
blinking and the flat icon will appear (see Abb.
•
Press LOG
/
.& to increase or
MIN/MAXT
to
decrease the value.
Each press tunes 100 ppm.
�
NOTE!
The alarm range is from 1000 ppm to 5000 ppm.
Press SET to confirm.
Set
up the alarm value within the specification range,
so
that accuracy is ensured.
Readings that are out of specification are only for reference and not suitable to be used
as
alarm limits.
46
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
