Page
12
7.
Timecode
:
The de-embedded timecode from the HD/SD-SDI source displays
on the lower part of the screen. The timecode setting is located in the Display
Menu. Refer to Table 2-9.
8.
Waveform/Vectorscope
:
This can be displayed only for SDI signals. The
waveform and vector of the input signal display are configurable in the
Display Menu. Refer to Table 2-9.
Rear Panel
Figure 2-3: Rear Panel Layout
SDI 1 SDI 2
In
Out
HDMI In
Ethernet
GPI
L/R Audio In 1
L/R
Audio
Out
L/R Audio In 2
Line 1 CVBS
RS-485
In/Out
12 VDC
Power
Connector
Power
Switch
In
Out
Line 2 Pr
Line 2 Pb/C
Line 2 CVBS/Y
Right Speaker
Left Speaker
Carrying Handle
Cable Ring
Headphone
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
The symbol to the left warns of electric shock hazard inside or outside
the unit. Disconnect the power cord before removing access panels.
