Page
13
1.
SDI 1 In
:
This input connector accepts 3G/HD/SD-SDI video signals. It is
compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R BT601. It can
be viewed using the SDI1 selection on the
Input
button menu.
2.
SDI 1 Out
:
This connector provides a re-shaped and re-clocked duplicate of
the
SDI 1 In
signal. This connection is compliant with SMPTE 424M, SMPTE
259M, SMPTE292M/ITU-R BT601.
3.
SDI 2 In
:
This is the second 3G/HD/SD-SDI video signal input. This
connection is compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R
BT601. It can be viewed using the SDI2 selection on the
Input
button menu.
4.
SDI 2 Out
:
This connector provides a re-shaped and re-clocked duplicate of
the
SDI 2 In
signal. This connection is compliant with SMPTE 424M, SMPTE
259M, SMPTE292M/ITU-R BT601.
5.
Line 1 In Video
: This is the first input for an analog CVBS video signal. It
can be viewed using the
LINE 1
selection on the
Input
button menu.
6.
Line 1 Out Video
: This is a pass through connection for the
Line 1 In
video
signal.
7.
Line 2 In CVBS/Y
: This is the second analog CVBS video input signal or the
luminance (Y) signal of Y/C or YPbPr. This input combined with the other Line
In 2 input signals can be viewed using the
LINE 2
selection on the
Input
button menu.
8.
Line 2 Out CVBS/Y
: This is a pass through connection for the
Line 2 In
CVBS/Y
video signal.
9.
Line 2 In Pb/C
: This is the chroma (C) signal of Y/C or YPbPr. This input
combined with the other
Line In 2
input signals can be viewed using the
LINE 2
selection on the
Input
button menu.
10.
Line 2 Out Pb/C
: This is a pass through connection for the
Line 2 In
Pb/C
video signal.
11.
Line In 2 Pr
: This is red (Pr) component of YPbPr. This input combined with
the other Line In 2 input signals can be viewed using the
LINE 2
selection on
the
Input
button menu.
12.
Line 2 Out Pr
: This is a pass through connection for the
Line 2 In Pr
video
signal.
13.
HDMI In
: This input supports HDMI and DVI signals. It uses an HDMI Type-
A connector. It can be viewed using the
HDMI
selection on the
Input
button
menu.
14.
Audio In 1
: A pair of analog audio inputs related to the Line 1 video signal
is provided on RCA jacks. They have a 47KΩ input impedance and will accept
Important:
The monitor and power adapter have been tested as a combined
apparatus to verify compliance with applicable safety and
electromagnetic compliance standards. Use of another power adapter
provided by the user may negate the compliance or not perform
properly. Wohler Technologies cannot accept any responsibility for the
outcome in such cases.
