Page
18
Table 2-6: Input Menu Structure
Input
Parameters
Default Value
Domain Range
Description
SDI 1
ON
OFF, ON
SDI 2
ON
OFF, ON
LINE 1
ON
OFF, ON
LINE 2
CVBS
OFF, CVBS, LINE 2 (Y/C),
LINE 2 (YPBPR)
HDMI
ON
OFF, ON
Enables or disables
the input choices
available in the
Input Select Menu
NTSC SETUP
7.5
0: Japan
7.5: North America
Select the NTSC
signal region.
NTSC PHASE
0
-50 to 50
FOCUS ASSIST
STANDARD
OFF
STANDARD
COLOR
OFF: Normal Video
STANDARD: An
image with
sharpened edges is
displayed.
COLOR: An image
with the color
selected in FOCUS
COLOR substituted
for the intensified
areas.
FOCUS LEVEL
49
0 to 100
Select the amount
of edge sharpening
in FOCUS ASSIST.
FOCUS COLOR
GREEN
RED
BLUE
GREEN
When FOCUS
ASSIST: COLOR is
selected, this
selects which color
will substitute.
LUMA ZONE
CHECK
ON
OFF, ON
OFF: Normal Video
ON: Compares the
signal luminance
with the LUMA
ZONE LEVEL
setting and fills the
higher luminance
areas with a zebra
pattern.
LUMA ZONE LEVEL 49
0 to 100
Set the luminance
comparison level
for the LUMA ZONE
CHECK.
The
Focus Assist
feature is designed to help with camera focusing. The
Luma
Zone Check
feature can help when setting the camera exposure.
