Page
38
Audio Page
First select the
AUDIO SOURCE
. Then select
SPEAK(er) OUT
selections for
LEFT
and
RIGHT
channels. These selections also apply to the AUDIO OUT and
HEADPHONE outputs.
METER SELECT
controls which and how many channels are metered,
independently of the SPEAK(er) OUT selections.
The
(S)
icon following some of the items in this menu indicates that this parameter
is individually saved according to the choice made in the Input Source Selection
Bar, as shown in Figure 4-2.
Certain settings include a
SET
button. To change these parameters, first make the
change and then click the
SET
button to put the change into effect.
Figure 4–7: Audio Page
