Page 5
CHAPTER 1: Installation
Introduction
Overview
The HDM-215-3G-TT monitor sets a new standard in LCD monitors for broadcast
and professional video applications. It provides a 21.5”, 8-bit, 1920 x 1080
resolution, 16:9 format, anti-glare IPS LCD screen. All video formats are scaled to
fit on the screen in the highest quality using 12-bit digital processing, precision
scaling and gamma correction to produce the best images possible.
Features
The HDM-215-3G-TT audio/video monitor is designed for confidence monitoring of
two 3G/HD/SD-SDI, one HDMI/DVI, one CVBS composite analog video, and one Y/C
and component input. Input signals are easily selected and displayed. Two to
sixteen audio channels may be selected for visual monitoring on bar graph style
level meters. On screen markers, waveform, vector, Picture in Picture (PiP) and
Picture by Picture (PbP) displays can be enabled on this full-featured monitor.
Focus Assist and Luma Zone modes can be engaged to assist with camera
adjustments. Stereo speakers provide audio monitoring. A headphone jack and
stereo analog audio outputs are also provided for external audio monitoring.
Parameters are selected and adjusted using an On Screen Display (OSD) Menu. An
RJ45 connector serves as the interface to six general purpose inputs which can be
optioned to control a variety of monitor functions. Monitor settings can also be
made with a web browser over Ethernet using the integral web server.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
