Page
27
HDMI Settings
Touching the
HDMI Settings
selection on the
Main Menu
proceeds to the
HDMI
Settings
menu, as shown in Figure 2-19.
Figure 2-19: HDMI Settings Menu
The controls in this menu function as follows:
1.
HDMI Display
: Set to
On
or
Off
to enable or disable the HDMI Output on
the rear panel. The HDMI Output will allow you to view the monitored video
on an external HDMI monitor.
2.
Use EDID
: HDMI monitors can produce Extended Display Identification Data
(EDID) to disclose their capabilities to the video source. The iVAM1-1 can use
this information to ensure its compatibility with the HDMI Monitor. If you
decide that you do not want the iVAM1-1 to receive this information, set this
switch to
Off
. By default this switch is set to
On
.
3.
Pixel Format
: This selection can only be adjusted if the
Use EDID
setting is
set to
Off
. The possible choices are:
a.
RGB
b.
YCbCr444
c.
YCbCr422
4.
Save & Exit
: When you have finished making the changes you want on this
screen, touch the
Save & Exit
button to save the changes and return to the
Unit Settings
menu.
To exit this menu without saving, touch the
Back
button.
