Page
21
Table 2-9: Function Key Menu Structure
Function Key
Parameters
Default Value
Domain Range
Description
F1
FOCUS
ASSIST
Set up the
F1 Function
key action.
F2
ASPECT
RATIO
Set up the
F2 Function
key action.
F3
IMAGE
FREEZE
Set up the
F3 Function
key action.
F4
IMAGE FLIP
CENTER MARKER
SAFE ZONE MARKER
FOCUS ASSIST
IMAGE FLIP
NATIVE RESOLUTION
IMAGE FREEZE
CHECK FIELD
ASPECT RATIO
Set up the
F4 Function
key action.
USB Upgrade
If it should become necessary to upgrade the software of the RM-3270W-3G, this
can easily be done without any additional equipment. Use the following steps:
1.
Obtain the upgrade file from Wohler Technologies and copy it to a mini USB
flash drive.
2.
Insert the flash drive into the USB connector on the back of the screen that
you want to upgrade.
3.
Go to the
Settings
menu, click the
Right (>)
button, and then the
Down
button until you reach the
USB Upgrade
selection.
4.
Click the
Right (>)
button
to begin the upgrade. Do not disturb any monitor
settings and do not remove the flash drive during the upgrade.
5.
After the upgrade is complete, the RM-3270W-3G will automatically restart.
This completes the software upgrade.
