6
© 2006 PANORAMAdtv ALL rights reserved
RM-3358W
User Manual P/N
821575
Rev-
C
Section 1: General Features and Specifications
Installation
Unpacking
Unpack the unit from the shipping container and inspect all articles for shipping damage. If you find any damage, notify the
shipping carrier immediately for claims adjustments. Compare the shipping box contents to the packing slip. Contact our
PANORAMAdtv sales representative if there are any unexplained shortages.
Cooling and Airflow
No special physical mounting considerations are necessary regarding unit heat dissipation except under adverse conditions. Provided
the ambient temperature inside the mounting enclosure does not exceed 40 degrees Celsius (104 degrees Fahrenheit), adjacent devices
can be rack mounted (or stacked) in proximity to the
RM-3358W
unit. If the above temperature is exceeded, allow a 1RU (1.75”/
25mm) space above and below the unit for air circulation.
Rack Mounting
The
RM-3358W
unit rack mounts in a standard EIA-310-D specification 19”/483 mm rack and needs 3RU of space. Allow
sufficient space at the unit rear for connector and cable clearance (approximately 4”/102mm). The
RM-3358W
unit rack mounts
from the front panel support rails. Rear support is not required. See page
14
for a top view of the unit showing width and depth
clearance dimensions.
General Installation Recommendations
Recommended Cables:
Recommended cable type for Composite (analog) or SDI video signals is:
Belden 1694A
(or equivalent).
