10
Section 2 – Basic Installation and Setup
This section explains how to install, connect and prepare the projector to achieve optimum image quality and
performance. Illustrations are graphical representations only and are provided to enhance the understanding of
the written material.
NOTE – It is highly recommended that only authorized WOLF CINEMA dealers and custom installation personnel
perform the projector installation.
2.1 Basic Installation Steps
The following instructions are for review as a quick setup guide. Refer to the remaining subsections for additional
setup and operating instructions.
Always power down the projector and disconnect all power sources before
servicing or cleaning.
Refer to Safety Warnings and Guidelines in Section 4, Maintenance.
STEP 1 ‐ Install the External Cooling System
This projector is delivered with a comprehensive external fan and exhaust ductwork assemblies.
WARNING: Never operate this projector without the external fan assembly.
This will cause the projector to overheat, and may cause significant internal
damage to the video proecssing components, xenon lamp and other
assemblies. This will void the Wolf Cinema warranty; contact your Wolf
Cinema dealer for additional details.
Summary of Contents for REF-1000
