56
Auto Power‐up
Enter a checkmark to enable the projector to automatically power up after losing power due to a power failure or
due to unplugging the projector during operation. Wolf Cinema recommends that this be left unchecked, as a
power loss in an unattended house will result in the projector turning on without anyone realizing it is on. Note
that unsaved display adjustments may be lost.
Set Date & Time
Enter/read the current year‐month‐day and hour‐minute‐second. Changes here reset the projector’s real‐time
clock.
MENU PREFERENCES — SUBMENU
Use the options in this submenu to adjust the
appearance, content and/or location of on‐screen
menus and messages.
LARGE MENU FONT
— Enter a checkmark to enlarge
menus and their text. You may have to adjust “Menu
Location” to accommodate the increased menu area.
MENU LOCATION
— Use the pull‐down list to choose a pre‐defined default or customized location for the display
of all on‐screen menus. To create a custom menu location quickly, choose a preset that is closest to the desired
location. Then adjust “Horizontal Shift” and “Vertical Shift” slidebars to move the menu to the desired location.
Avoid locations too close to a corner or edge to prevent cropping of larger menus.
HORIZONTAL SHIFT AND VERTICAL SHIFT
— Shift your menus as desired, creating a customized menu location.
DISPLAY CHANNEL LIST
— Enter a checkmark if you want to see a scrollable channel list whenever you press
Channel from your presentation. Channels marked with a list icon in the Channel Setup menu will appear here. The
“Display Channel List” option also enables on‐screen feedback when using the Channel key. If you prefer to hide
the channel list and input dialog box while switching channels and sources during a presentation, clear the
checkbox. NOTE: The Channel List and input dialog box cannot be hidden during use of the menus.
DISPLAY SLIDEBARS
— Enter a checkmark to superimpose a small slidebar over the current image whenever an
adjustable parameter is selected directly with a key such as Contrast or Bright . If “Display Slidebars” is unchecked,
these slidebars can still be accessed, but will be hidden during adjustment. This option does not affect slidebars in
menus.
DISPLAY ERROR MESSAGES
— Choose how you want to be notified of errors detected in either the incoming signal
or projector. Select “Screen” or “All” (default) to see brief on‐screen messages. This is particularly recommended
during setup or testing of the projector. Or select “Serial Ports” to receive messages via RS232 or RS422 serial
communication only. To hide error message displays, such as during shows and presentations, select “Off” or
“Serial Ports”.
Summary of Contents for REF-1000
