Wolf 814425, Quick Start Manual

MODEL • 814425

SINGLE BLOWER INSTALLATION

For hood model PWC362418 using blower 
model 814419, 814420, or 814421.
For hood model PWC422418 using blower 
model 814421.

4.  Fasten 

(4) 10-24 HEX NUTS

 (provided) to the 

(4) ADAPTER 

PLATE STUDS

 leaving a 1/4" gap.

5.  Lift blower into position inside hood. Engage all adapter plate 

studs into 

KEYHOLES

 in top of hood. From 

TOP OF HOOD

, 

tighten all 4 hex nuts.

6.  Plug blower 

POWER CORD

 into receptacle inside the hood. 

Route wires away from blower's moving parts. Bundle wires 

with wire tie (provided).

(4) 10-24 

HEX NUTS

(4) ADAPTER

PLATE STUDS

TOP OF HOOD

POWER 

CORD

SINGLE BLOWER INSTALLATION

For hood model P

I

363418 using blower model 

814419, 814420, or 814421.
For hood model P

I

423418 using blower model 

814421.

1.  Mount blower to 

MOUNTING PLATE

 (provided with blower) 

with 

(4) 10-24 NUTS

 (provided).

2.  Remove 

CENTER PIECE

 of 

ADAPTER PLATE

.

3.  Mount blower / mounting plate assembly to 

ADAPTER PLATE

using 

(4) 10-24 NUTS

 (provided).

ADAPTER PLATE

(4) 10-24 NUTS

(4) 10-24 NUTS

MOUNTING PLATE

CENTER 

PIECE

KEYHOLES

4.  Lift blower into position inside hood. Engage 

(2) TABS

 on 

blower into 

(2) SLOTS

 in 

TOP OF HOOD

. Secure blower to 

(2) THREADED STUDS

 with 

(2) 10-24 HEX NUTS

 (provided).

5.  Plug blower 

POWER CORD

 into receptacle inside the hood. 

Route wires away from blower's moving parts. Bundle wires 

with wire tie (provided).

(2) 10-24 

HEX NUTS

(2) THREADED 

STUDS

TOP OF HOOD

POWER 

CORD

1.  Mount blower to 

MOUNTING PLATE

 (provided with blower) 

with 

(4) 10-24 NUTS

 (provided).

2.  Remove 

CENTER PIECE

 of 

ADAPTER PLATE

.

3.  Mount blower / mounting plate assembly to 

ADAPTER PLATE

using 

(4) 10-24 NUTS

 (provided).

ADAPTER PLATE

(4) 10-24 NUTS

(4) 10-24 NUTS

MOUNTING PLATE

CENTER 

PIECE

(2) TABS

(2) SLOTS