Descale the Appliance
1
Touch Settings twice. The Set Language screen appears.
2
Touch the right arrow key to move to Descale Appliance.
3
Touch Enter. The Descale Now screen appears.
4
To start descaling the appliance, use the arrow keys to
underline yes.
5
Touch Enter on the selection.
Set the Water Hardness
1
Touch Settings twice. The Set Language screen appears.
2
Touch the right arrow key to move to Set Water Hardness.
3
Touch Enter. The Water Hardness screen appears.
4
Use the arrow keys to underline the water hardness level:
▪
Use Water Hardness Soft (1-15°fH, 1-8°dH) if the
factory test strip reads less than 60 ppm (parts per
million).
▪
Use Water Hardness Medium (16-35°fH, 9-20°dH) if
the factory test strip reads between 60 ppm and 120
ppm.
▪
Use Water Hardness Hard (36-50°fH, 21-28°dH) if
the factory test strip reads greater than 120 ppm.
5
Touch Enter to confirm.
Set the Loudness
1
Touch Settings twice. The Set Language screen appears.
Convection Steam Oven Controls
Settings
service.subzero.com
03/2019
37
