26
W O L F S E A L E D B U R N E R R A N G E T O P
C A R E
C L E A N I N G
T H E R A N G E T O P
E X T E R I O R C L E A N I N G
Cleaning the classic stainless steel exterior
finish:
Use a soft, nonabrasive stainless steel
cleaner and apply with a soft, lint-free cloth.
To bring out the natural luster, lightly wipe the
surface with a water-dampened microfiber
cloth, followed with a dry microfiber cloth. All
work should follow the grain direction of the
finish. Better results are obtained by keeping
the cloth in continuous contact with the metal.
Refer to Care Recommendations on pages
24–25 for cleaning specific components of the
Wolf sealed burner rangetop.
R A N G E T O P C L E A N I N G T I P S
Wait until surfaces are cool before cleaning.
For best results, wipe up spills and spatters
as they occur and immediately after the
rangetop has cooled. If splatters are
allowed to cook on, they may permanently
damage or stain the finish.
If in doubt about using one of your
cleaners, check the label. To check if it is
safe to use on your range, try a small
amount on an inconspicuous area using
very light pressure.
Use caution when spraying cleaners. Some
contain caustic ingredients that can damage
adjacent parts and finishes. Protect the
adjacent parts by masking them off so that
the overspray is contained to the finish
being cleaned.
Do not spray cleaners on electrical controls,
igniters, wires or knob valve stems.
